Newer
Older
<!-- Template: -->
<!-- ### Features -->
<!-- -->
<!-- ### API -->
<!-- -->
<!-- ### Enhancements -->
<!-- -->
<!-- ### Bugfixes -->
<!-- -->
<!-- ### OpenID Provider -->
<!-- -->
<!-- ### Dependencies -->
<!-- -->
### API
- Changed the restriction `ip` key to `hosts`:
- Backward compatibility is preserved. The legacy key `ip` is still accepted.
- The `hosts` entry can contain:
- Single ip address
- Subnet address
- Host name (with or without wildcard)
- To compare against this, on request a reverse dns lookup is done for the request's ip address
### Enhancements
- Location restriction can now be done with host names, not only plain ip addresses, see above for more details.
- Webinterface: Added message to tokeninfo after MT creation and TC exchange to indicate that users must copy the
mytoken to persist it.
### Bugfixes
- Fixed a bug in the web interface where the scope selection indicator for access tokens where not updated.
### Dependencies
- Bump go version to 1.19
- Bump golang.org/x/mod from 0.5.1 to 0.6.0
- Bump github.com/gofiber/fiber/v2 from 2.37.1 to 2.38.1
- Bump github.com/gofiber/helmet/v2 from 2.2.16 to 2.2.17
### API
- Dropped `subtoken_capabilities`, since the benefit was minimal, but made things more complex
- Removed `subtoken_capabilities` from all API requests and responses
- Removed `subtoken_capabilities` from the mytoken
### Enhancements
- Added introduction text in the web interface
- Session mytoken in web interface no longer uses `subtoken_capabilities` due to the drop, moved subtoken
capabilities to the session mytoken as capabilities; added rotation on AT requests, added auto revocation
### Bugfixes
- Fixed a bug where mytokens with the `revoke_any_token` capabilities could revoke mytokens of other users if they
can get possesion of the `revocation_id`
- Fixed problems in the web interface with restrictions / issuer selection when not logged in.
### Dependencies
- Bump github.com/coreos/go-oidc/v3 from 3.2.0 to 3.4.0
- Bump github.com/gofiber/template from 1.6.30 to 1.7.1
- Bump github.com/gofiber/fiber/v2 from 2.36.0 to 2.37.1
- Bump github.com/valyala/fasthttp from 1.39.0 to 1.40.0
- Bump github.com/gliderlabs/ssh from 0.3.4 to 0.3.5
- Bump github.com/gofiber/helmet/v2 from 2.2.15 to 2.2.16
## mytoken 0.5.4
### Bugfixes
- Fixed a bug in the webinterface where scope restrictions did not update correctly when not logged in and issuer
changed
## mytoken 0.5.3
### Bugfixes
- Fixed a bug in the webinterface where mytokens could not be created when not logged-in
## mytoken 0.5.2
### Bugfixes
- Fixed a bug with requesting a consent screen for mytoken requests
## mytoken 0.5.1
### Enhancements
- In the tokeninfo - subtokens pane of the webinterface now only show the subtokens of the token in question,
leaving out the actual token as their parent
### Bugfixes
- Fixed two bugs in the tokeninfo webinterface when introspecting mytokens issued by another server
- Fixed CORS of jwks
## mytoken 0.5.0
### Features
- Trusted web applications can skip the consent screen
- Reworked and improved major parts of the web interface:
- Consent Screen:
- On default a more compressed view is shown, where sections can be expanded if needed.
- Displays the content of the `application_name` parameter if given.
- Added possibility for clients to create a consent screen for mytoken-from-mytoken requests
- Home Screen:
- Replaced the tokeninfo pane with a new one
- Removed tokeninfo about the session's mytoken
- Added a tokeninfo pane to display tokeninfo for arbitrary mytokens (incl. introspection, history, subtokens)
- Added possibility to create a transfer code
- Moved the list of mytokens to a separate pane
- Improved displaying the tree structure of mytokens
- Reversed the token history order
- Added "Exchange transfercode" pane, where a transfercode can be exchanged into a mytoken
- Some parts can be used without being logged-in
- Token Revocation:
- Added possibility to revoke a mytoken in the tokeninfo pane
- Added possibility to revoke listed tokens in the "My Mytokens" pane and in the "Tokeninfo - Subtokens" pane.
- Capabilities:
- Simplified the checking of capabilities
- Read/Write capabilities are now not split but can be toggled
- Create Mytoken:
- After creation the mytoken is displayed in the tokeninfo pane, where it can be copied and of course
information about the token is displayed
- Settings:
- Grant Types:
- Include pages of different grant types in this view.
- Grant Types can be expanded (collapsed on default).
- Link to grant type page that was not clear enough is no longer needed.
### API
- Added `application_name` to mytoken requests.
- Added `token_type` to token introspection response.
- Added possibility to revoke tokens by `revocation_id`:
- Added new `revoke_any_token` capability.
- Added `revocation_id` parameter to responses that list tokens.
### Enhancements
- Admins can adapt the webinterface, i.e. for a custom style
### Bugfixes
- Fixed a bug in the mytoken webinterface where token introspection did not work on the settings page
- Fixed a bug in the mytoken webinterface restrictions editor, where audiences would always be set to zero when
switching from the JSON editor to the GUI editor
- Fixed a bug where non-expiring mytokens would be revoked when database cleanup was enabled.
- Fixed a bug where the server could potentially crash
- Bump github.com/valyala/fasthttp from 1.37.0 to 1.39.0
- Bump github.com/gofiber/fiber/v2 from 2.34.0 to 2.35.0
- Bump github.com/sirupsen/logrus from 1.8.1 to 1.9.0
- Bump github.com/gofiber/template from 1.6.28 to 1.6.30
- Bump github.com/gofiber/helmet/v2 from 2.2.13 to 2.2.15
### Bugfixes
- Fixed a bug where mytokens could not be used with x-www-form-urlencoding
- Fixed a bug where `x-www-form-urlencoding` was not accepted on token revocation endpoint
### Dependencies
- Bumped github.com/jmoiron/sqlx from 1.3.4 to 1.3.5
- Bumped github.com/lestrrat-go/jwx from 1.2.18 to 1.2.23
- Bumped github.com/gofiber/template from 1.6.22 to 1.6.27
- Bumped github.com/gofiber/helmet/v2 from 2.2.6 to 2.2.12
- Bumped github.com/pires/go-proxyproto from 0.6.1 to 0.6.2
- Bumped github.com/gofiber/fiber/v2 from 2.26.0 to 2.32.0
- Bumped github.com/valyala/fasthttp from 1.33.0 to 1.36.0
## mytoken 0.4.2
### Bugfixes
- Fixed a bug where the webinterface was not updated to use the renamed tokeninfo subtokens action
## mytoken 0.4.1
### API
- Changed tokeninfo subtokens action name
- Added the `tokeninfo` capability to the default capabilities of a mytoken
### Enhancements
- The `tokeninfo` capability is now checked by default when creating a mytoken
- Improved the output in the ssh protocol on bad requests
### Bugfixes
- Fixed tooltip text in webinterface on the book icon of read-only capabilities
- Fixed a bug where in the webinterface when creating a new mytoken the instructions to go to the consent screen, where
still visible after the mytoken was obtained
- Fixed a bug where the consent screen stopped working after a timeout without displaying any error message
- Fixed a bug where 404 and other status codes where logged as errors
### Dependencies
- Bumped github.com/gofiber/fiber/v2 from 2.25.0 to 2.26.0
- Bumped github.com/gofiber/template from 1.6.21 to 1.6.22
- Bumped github.com/gofiber/helmet/v2 from 2.2.5 to 2.2.6
### Features
- Smart Logging: Only log up to a certain log level on default, but on error log everything
- Added User Settings endpoint
- Added possibility for user grants: grants that are not enabled on default, but can be enabled / disabled by a user
and (might) require additional setup
- Added `ssh` user grant:
- Can be enabled / disabled at the grants endpoint
- SSH keys can be added, removed, listed at ssh grant endpoint
- Added ssh keys can be used to obtain ATs, MTs, and other information (e.g. tokeninfo) through the ssh protocol at
port `2222`
- Extended capabilities:
- Some capabilities now have a "path" and "sub"-capabilities, e.g. (`tokeninfo` includes `tokeninfo:introspect`
and more).
- Some capabilities have a read only version, e.g. `read@settings`
- Some capabilities have been renamed, e.g. (`tokeninfo_introspect` -> `tokeninfo:introspect`)
### API
- Changed default redirect type in auth code grant to `native`
### Mytoken
- Added `auth_time` to mytoken
### Enhancements
- Added request ids to response header and logging
- Refactored database; now using stored procedures which should ease database migration
- Moved automatic cleanup of expired database entries to the database
- Support symlinks when reading files
### Security Fixes
- Fixed a bug, where mytokens could be created from any mytoken not only from mytokens with the `create_mytoken`
capability.
### Bugfixes
- Fixed a bug where restrictions did not behave correctly when multiple subnets were used
- Fixed response type on oidc errors on redirect in the authorization code flow
- Fixed `404` on api paths returning `html` instead of `json`
### Dependencies
- Updated various dependencies to the newest version
### Other
- Dropped the `mytoken-dbgc` tool, now moved to the database
### Mytoken
- Added the name of a mytoken to the JWT.
- Don't redirect from `/.well-known/openid-configuration` to `/.well-known/mytoken-configuration`. Instead,
returning the same content on both endpoints.
### Enhancements
- Removed buttons from webinterface in the tokeninfo tabs. The content now loads directly when switching the tab.
- Removed most need for CDNs; now self-hosting resources.
- Added setup of db database and db user to the setup utility.
- Made Link in the web interface on the create-mytoken page better visible.
- Fixed the error returned from the server if no capability for a mytoken was provided.
- Fixed PKCE code verifier length.
- Fixed Datetimepicker issues on consent page.
- Fixed response type if an (oidc) error occures on the redirect step of the authorization code flow.
- Fixed a bug where mytokens that are not yet valid could not be created
## mytoken 0.3.2
- Fixed password prompt for migratedb
- Changes to the mytoken
- Added a version to the mytoken token
- Added token type 'mytoken'
- Now using a hash value as the subject
- Added Dockerfiles; mytoken can easily run with swarm
- Added OIDC-compatibility for requesting ATs
- ATs can be requested using the mytoken as the refresh token in a OIDC refresh flow
- Deployment Configuration
- Added option to set maximum lifetime of mytokens
- Added option to disable restriction keys
- Made request limits configurable
- Changed setup db to new db migration tool
- Added support for token rotation, incl. optional auto revocation
- Added option to set maximum token length when requesting a mytoken
### Webinterface
- Added option to create mytoken in the web interface
- Reworked consent screen
- Added possibility to set scopes and audiences when requesting an AT
- Improvements
### Enhancements
- Using better cryptographic functions
- Set cookie as secure if issuer uses https, indepent of a potential proxy
- Improved packaging
- Improved code base
- Improved error tracebility
### Bugfixes
- Fixed bugs in the webinterface
- Fixed other bugs
### OIDC
- Add PKCE support
### Dependencies